Neck spinning is the main pressure-bearing part

Neck spinning is the main pressure-bearing part

Neck spinning is the main pressure-bearing part of pressure vessel

Neck spinning is the main pressure-bearing component of a pressure vessel, and the quality of the neck spinning is directly related to the long-term operation of the pressure vessel. A technician in our company is a skilled craftsman. During his 8 years of working in the company, he has been responsible for the sealing head forming process qualified, and he has won praises from many people for his hair-like thickness reduction.

The so-called closing spinning refers to the process of applying pressure to the sheet by controlling the distance between the spinning wheels to make it gradually thinner, and it needs to be adjusted little by little during the operation. In the normal spinning process, the amount of thinning is generally plus or minus 2-3 mm of the standard value, but in his hands, the amount of thinning is often controlled within plus or minus 0.2 mm, which is the diameter of a hair strand. From an ordinary employee to a skilled technician, from a technician to the company’s first batch of technicians to be praised.

Due to the particularity of the company’s products and the position he is in, both the raw materials and the added value of the products he comes into contact with are relatively high in the company. For the benefit of the company, he did not let go of every minute defect, such as pits, pits, and scratches on the surface of the stainless steel, which could not escape his “eye-catching eyes.” People in the company are accustomed to calling him the “teacher”, because whenever he sees someone who has not protected the surface of the stainless steel or violated the craftsmanship discipline, he will step forward to dissuade and guide him.

Fymicohuang

Comments are closed.